the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

does the port need to face the same way?


Post ReplyPost New Topic
< Prev Topic Next Topic >
snhtown 
Copper - Posts: 178
Copper spacespace
Joined: August 31, 2006
Location: United States
Posted: September 05, 2008 at 3:38 PM / IP Logged  

forgive me for not being able to explain this right but when designing the box do i need to face the port any certain way? i noticed that when i face the speakers towards the front of the car i feel the bass more as vs firing it towards the rear. is this because of the speakers, the port or both? to get this "feeling"  where should i aim the speakers and ports? could i fire the speakers towards me and the port towards the rear of the car? or the other way around? i have a 07 magnum, would firing towards the glass produce anything soundwise?

reax222 
Copper - Posts: 220
Copper spacespace
Joined: March 11, 2006
Location: United States
Posted: September 05, 2008 at 5:37 PM / IP Logged  
I'll take a crack at this. You have two pressure waves that produce sound. One in front of the speaker and one behind the speaker.   These two pressure/sound waves are at 180 degrees from each other. If the front and rear wave meet at the same time, the waves will neutralize each other and there will be almost no pressure.
With a port properly designed they will be timed so one frequency will be enhanced by both waves and none should be no destructive interference. So for the most pressure/sound both the port and the cone be aimed at the spot you wish to experience it. If you angle or deflect the back wave, it might step out of phase.
I wasn't present for box building week, but I did pick up this much of it.
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: September 05, 2008 at 8:08 PM / IP Logged  
The sound waves coming out the of port are not 180's out of phase all the time...it is a resonating air mass.
You can experiment but safest way is to have the driver and port on the same plane. Sometimes CRX style is louder but sub back port back sounds better.
there is no concrete way of doing things. Its all about the design
reax222 
Copper - Posts: 220
Copper spacespace
Joined: March 11, 2006
Location: United States
Posted: September 05, 2008 at 9:24 PM / IP Logged  
Just to clarify, The waves out of the port should be very close in phase, but the speaker will produce two phases, forward and reverse.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: September 06, 2008 at 7:59 AM / IP Logged  

Generally it doesn't make much difference, in a typical daily driver install, what side of the box the port faces.  The most important thing is that both the driver and port fire into the same general cavity of air.  Example, both fire into the truck rather than port extended into cabin...or, both fire into the cargo area of a hatchback, e.g.

Some, whose goal is comp SPL, will end up building a handful of box versions and testing db level with each configuration.  The loudest reading, while great for comp numbers, is usually not the best sound.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer