bass blockers

Home / the12volt's Install Bay / Car Audio / bass blockers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

deegz97

Member - Posts: 21

Joined: June 30, 2008

Location: Missouri, United States

Posted: September 09, 2008 at 3:35 PM / IP Logged

Hi all,

I was recommended by the manufacturer of my speakers (coax 6.5's) to add a bass blocker on the positive input. The manufacturer recommended a 200 Mfd @ 100v, non-polarized. Well, i got a hold of them, and they are big. How can i figure out which frequencies they are going to inhibit from my 6.5's? I am going to put them on this weekend, just kind of curious before the fact if there will be any mid at all...

Thanks again!

Jeff

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: September 09, 2008 at 3:53 PM / IP Logged

https://www.the12volt.com/caraudio/crosscalc.asp#cc

At 4-ohms, 200mfd = about 200Hz high pass.

Support the12volt.com

Back to Top

deegz97

Member - Posts: 21

Joined: June 30, 2008

Location: Missouri, United States

Posted: September 09, 2008 at 4:39 PM / IP Logged

DYohn wrote:

https://www.the12volt.com/caraudio/crosscalc.asp#cc

At 4-ohms, 200mfd = about 200Hz high pass.

Thanks alot, but taking the risk of sounding dumb - i don't understand any of this...is there another sticky I could reference for some guidance?

Back to Top

the fat kid

Member - Posts: 35

Joined: February 05, 2008

Posted: September 09, 2008 at 5:13 PM / IP Logged

ive never found a pair to work right, idk i had them installed with my door speakers on my blazer when i was 16 and they just didnt work right, if you got the cash get an amp with a high pass filter or a headunit with that option.

Back to Top

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: September 09, 2008 at 6:20 PM / IP Logged

deegz97 wrote:

DYohn wrote:

https://www.the12volt.com/caraudio/crosscalc.asp#cc

At 4-ohms, 200mfd = about 200Hz high pass.

Thanks alot, but taking the risk of sounding dumb - i don't understand any of this...is there another sticky I could reference for some guidance?

Follow the link on the left titled "Passive Crossovers."

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bass blockers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.