the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

radio will not cut off


Post ReplyPost New Topic
< Prev Topic Next Topic >
bigjul45 
Member - Posts: 46
Member spacespace
Joined: January 15, 2007
Location: United States
Posted: February 09, 2009 at 10:19 PM / IP Logged  

I have a 1997 Chevy Tahoe. I installed my radio (alpine iva d310)  and sometimes it will stay on when I cut my truck off. If I press one of the automatic window buttons It will cut off. Can some give me an Idea as to how I would fix this problem?

soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: February 10, 2009 at 12:01 PM / IP Logged  
hmm, very weird, what do you have the red wire hooked to? this is the wire that turns the radio on and off, and it should be hooked to a wire that turns on and off with the vehicle. did you buy an install harness or did you just hack the factory wire harness?
bigjul45 
Member - Posts: 46
Member spacespace
Joined: January 15, 2007
Location: United States
Posted: February 10, 2009 at 6:11 PM / IP Logged  
I went straight to the factory wire harnes. The lat radio I had worked fine. My truck was broken into and they ripped the last radio out. I put in a new radio and this is what I get.
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: February 10, 2009 at 6:16 PM / IP Logged  
if you can, i would suggest just running a new wire to the heavy gauge orange wire at the ignition switch. if you take off the knee panel under your steering wheel you should see it staring you in the face. it will be coming from the steering column.
abice 
Member - Posts: 17
Member spacespace
Joined: February 13, 2009
Location: New York, United States
Posted: February 13, 2009 at 11:57 PM / IP Logged  
Hi i have a 2002 pontiac bonneville and my situation is that i have two wiring harnesses with it gmos05 gmrc04 both should hold onstar RAP chimes and dimming lights now once the aftermarket deck is hooked in I can take my key out open the door and it wont shut off or stop playing music its constantly on where can i find accessory power and where do i bring it into the deck? for a solution we are going to run a direct wire from the windshield wiper fuse in the engine compartment fusebox is this a good solution and can it do damage if we do this?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer