kenwood 9104 problems at 2 ohms?

Home / the12volt's Install Bay / Car Audio / kenwood 9104 problems at 2 ohms? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cooter.brown

Member - Posts: 6

Joined: August 19, 2009

Location: North Carolina, United States

Posted: August 21, 2009 at 9:27 AM / IP Logged

I have a Kenwood 9104D amp pushing 4 ID 12" at 2 ohms in an 08 Jeep Wrangler. I was having problems with the amp so I took it to the shop and they said that the amp couldn't actually run more then 1 speaker at 2 ohms. Now I am not genius but I am pretty sure that 2 ohms is 2 ohms whether it be 1 sub or 1000 subs. If I am wrong please let me know.

Back to Top

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: August 21, 2009 at 10:21 AM / IP Logged

lol at shop.

You're correct as long as your wiring is correct. if you have 4 SVC subs you can do it at 1 ohm or 4 ohms. Which, if you had connected all the leads together it would give you 1 ohm. Which the amp is not stable at.

Check your resistance going to the speaker input on the amp, disconnected from it of course.

Back to Top

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: August 21, 2009 at 9:48 PM / IP Logged

What is the problem? It will run more than one sub.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood 9104 problems at 2 ohms?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.