can you figure port hz from sub specs

Home / the12volt's Install Bay / Car Audio / can you figure port hz from sub specs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

diverdown269

Member - Posts: 10

Joined: July 12, 2009

Location: Kentucky, United States

Posted: September 07, 2009 at 11:24 AM / IP Logged

Can you figure the Hz to tune a port to based in the frequency response of the sub ? Just wondering if there is a formula

I have a 10" MTX Terminator RS4410-44 with a frequency response of 38Hz-150Hz

Some fear the Abyss... Other, chase it into the DEPTHS !!!

Back to Top

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: September 07, 2009 at 12:01 PM / IP Logged

frequency response specs of all subwoofers is pretty much irrelevant to what the subwoofer will play.

Send it a 10Hz tone it will play 10Hz.

Those specs are retarded...usually the lowest number is the Fs of the speaker...but all speakers will play below Fs

Custom Enclosure Design

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

can you figure port hz from sub specs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.