the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amp suggestions


Post ReplyPost New Topic
< Prev Topic Next Topic >
mastermindz 
Copper - Posts: 70
Copper spacespace
Joined: December 17, 2009
Location: California, United States
Posted: July 03, 2010 at 7:55 PM / IP Logged  
Currrently I have a 15" kicker L7 4 ohm dvc, wired to a kenwood 9103D monoblock at 900 watts Rms and I'm having my amp cut out after a few mins of hard play. I've benched the amp once already, and I've decided just to go with a better amp, any suggestions? Thanks
Mastermindz
topinstaller200 
Copper - Posts: 164
Copper spacespace
Joined: June 02, 2010
Location: Florida, United States
Posted: July 05, 2010 at 12:01 PM / IP Logged  

Something at least 1000W RMS or better at 4Ohm. I am sure you are using 0/1 gage wire for your power and ground connections right?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer