using a high/low level converter?

Home / the12volt's Install Bay / Car Audio / using a high/low level converter? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

emorse2323

Copper - Posts: 106

Joined: January 01, 2003

Location: United States

Posted: May 16, 2003 at 8:59 AM / IP Logged

IF you use a convertor because of a factory radio what do you use for the remote wire?? Also what is the best to do tap into the front or back speakers?

thanks

Back to Top

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: May 16, 2003 at 9:12 AM / IP Logged

For the remote I usually tap into the radios switched 12 volt that turns the factory radio on and off with the ignition. If the car dose not have one then I will find another switched 12 volt source. As far as taping into the front and back speakers it depends on the car. What kind of car are you referring to?

Back to Top

emorse2323

Copper - Posts: 106

Joined: January 01, 2003

Location: United States

Posted: May 16, 2003 at 2:17 PM / IP Logged

The car is a 2003 nissan maxima

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

using a high/low level converter?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.