Maestro with FO1 Harness

Home / the12volt's Install Bay / Car Audio / Maestro with FO1 Harness

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dunn0321

Member - Posts: 10

Joined: June 29, 2018

Location: Tennessee, United States

Posted: February 28, 2019 at 8:50 AM / IP Logged

I have a 2010 F250 I just bought a Pioneer AVH-1330nex I reflashed the maestro to work with the Pioneer but all I'm getting is the red flashing light on the Maestro. The radio works just fine but I have no steering wheel controls. I have checked the datalink connector from the maestro to the radio and it's seated snug in there. Any suggestions?

Josh Dunn

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.