Kenwood DNX697S, 2Way or 3Way Speaker Setup

Home / the12volt's Install Bay / Car Audio / Kenwood DNX697S, 2Way or 3Way Speaker Setup

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

trblsme82

Member - Posts: 2

Joined: July 16, 2020

Location: California, United States

Posted: January 20, 2021 at 11:34 AM / IP Logged

The headunit has the option of a 2 or 3way speaker setup and its throwing me for a loop. All my door speakers are running to their own amp and have a different sub and amp as well. I have a set of rca in each preout front rear and sub. I get nothing out of the front preout. Is it because I’m on the 3 way setup?

Ryan springfield

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.