dvc sub and 2 channel amp

Home / the12volt's Install Bay / Car Audio / dvc sub and 2 channel amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ir8st8

Member - Posts: 18

Joined: April 29, 2003

Posted: December 10, 2003 at 7:50 PM / IP Logged

can i run each voice coil on a dvc sub from seperate channels on a 2 channel amp?

"thats red to negitive and black to postive....... right?"

Back to Top

bfog99

Copper - Posts: 212

Joined: June 04, 2003

Location: United States

Posted: December 10, 2003 at 8:22 PM / IP Logged

ok, so from what i understand now... yes. however it is not recommended, there are better ways. wire the sub parallel (8ohm load) then run it to the amp bridged. it will give the same amount of power to the sub at a safe load for the amp and a safe connection to the amp.

Back to Top

Stevolon

Member - Posts: 28

Joined: November 21, 2003

Location: Canada

Posted: December 11, 2003 at 9:39 AM / IP Logged

I believe bfog99 ment to say "wire the sub in series to 8ohm load and bridge the amp."dont parallel the coils or you will be at 2ohm witch is 1 ohm stereo. this would be bad.

Steve@A.E.S

Back to Top

bfog99

Copper - Posts: 212

Joined: June 04, 2003

Location: United States

Posted: December 11, 2003 at 11:23 AM / IP Logged

yeah, series. my bad.

Back to Top

ir8st8

Member - Posts: 18

Joined: April 29, 2003

Posted: December 11, 2003 at 2:03 PM / IP Logged

no problem... i apreciate the help..... just trying to figure out the best way.... looks like im gonna get a mono 2ohm stable bridgable amp and run the single dvc sub at 2 ohms paralell.... that seems to be the easiest.....

thanks

"thats red to negitive and black to postive....... right?"

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dvc sub and 2 channel amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.