the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Best place to pick up speaker level inputs


Post ReplyPost New Topic
< Prev Topic Next Topic >
CJ Majesty 
Member - Posts: 3
Member spacespace
Joined: November 08, 2002
Location: United States
Posted: June 03, 2004 at 11:56 AM / IP Logged  
2004 Acura Tsx with Nav. I cannot swap out headunit for it is one with the nav.
where is the best place to grab a singal for speaker level inputs. (no RCA Outputs)
before factory amp.
or after factory amp.
My set up.
3 Alpine MRV t320's
1 for polk components up front
1 for polk compnent in the back
& 1 for JBL 6x9's in the back from the factory the 6x9's only play bass. I think theres something in after the factory amp that splits them.
is there anything wrong with this set up
Also I want to get a Sound ate snhond3.(AUX Input) I am going to have to do this conversion. Can I pick up a signal from each of the channels from the Honda harness with this conversion. Im not sure exactly what it does.
http://shop.store.yahoo.com/logjam/snhond3navinst.html
CJ Majesty 
Member - Posts: 3
Member spacespace
Joined: November 08, 2002
Location: United States
Posted: June 03, 2004 at 1:11 PM / IP Logged  
OK that last part was a newb question i called soundgate & you cant get a signal from an input only an output.
mikedawg 
Copper - Posts: 142
Copper spacespace
Joined: August 12, 2003
Location: United States
Posted: June 06, 2004 at 10:46 AM / IP Logged  
youre gonna have to get a "line out converter" it turns a set of speaker wires into rca signals. or you can find amps with speaker level inputs. i like the alpine v12s.
always looking for new info and willing to give it
customsuburb 
Gold - Posts: 1,813
Gold spacespace
Joined: January 17, 2004
Location: United States
Posted: June 06, 2004 at 1:53 PM / IP Logged  
You should get the signal after the factory amp (usually at the factory speaker locations, or at the location of the amp). You can always extend the factory speaker wiring to the loaction of your amp if the included harness for the speaker level inputs isn't long enough.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer