Elipse HU & Kenwood mini EQ ?

Home / the12volt's Install Bay / Car Audio / Elipse HU & Kenwood mini EQ ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Thuan

Copper - Posts: 88

Joined: May 20, 2004

Location: United States

Posted: June 09, 2004 at 5:14 AM / IP Logged

i burnt out my deck a few weeks back and a friend of mines gave me an old deck he pulled out of a car at his wrecking yard...Eclipse 5331...also gave me a Kenwood KGC-4042A eq. first question...does this deck run off of an amp or is there already a preamp...he told me theres a preamp but i dont see anything stating that. second...how should i hook up the EQ? thanks.

Thuan

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: June 09, 2004 at 8:26 AM / IP Logged

The Eq can only be used if you are running your speakers off a seperate amp. If you are then you run the front preouts on the eclipse to the inputs on the eq, there is only one set, then you run rca's from the eq to the amp in the back. Put Power, Ground, Ignition to the Eq and you are done. I have one of those eq's and have installed the damn thing in so many of my friends ash trays its rediculous

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Thuan

Copper - Posts: 88

Joined: May 20, 2004

Location: United States

Posted: June 09, 2004 at 2:41 PM / IP Logged

alright so theres 4 sets of rca's on the eq...im running from the deck to eq these 3 rca's : eq output - subwoofer, eq output - front, eq output - rear, and eq input to my amp...right? so lets say im running 2 seperate amps...one for subs...one for components...so the eq rca to sub and eq rca's to components CAN be ran through 2 seperate amps at the same time? thanks.

Thuan

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Elipse HU & Kenwood mini EQ ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.