Would it came out right

Home / the12volt's Install Bay / Car Audio / Would it came out right (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

winston_smith

Member - Posts: 41

Joined: November 17, 2004

Posted: December 02, 2004 at 10:58 PM / IP Logged

So For my first box i made a 3d model of it and took all my mesurements from it. I had some doubts as to if it would come out right, being my first time using a 3d modeling program. Anyhow here's the model i made.

Would it came out right -- posted image.

Back to Top

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: December 03, 2004 at 12:02 AM / IP Logged

What modeling program are you using?

New Project: 2003 Pathfinder

Back to Top

xaudiopipex

Copper - Posts: 66

Joined: June 23, 2004

Location: United States

Posted: December 03, 2004 at 12:12 AM / IP Logged

what kind of sub and amp are you going to use?

Back to Top

winston_smith

Member - Posts: 41

Joined: November 17, 2004

Posted: December 03, 2004 at 5:29 AM / IP Logged

SketchUp

Um and the topic did say woot not would some kinda auto spell check??

And i'm using a 12" brahma inverted and a jbl BP600.1

Back to Top

stevdart

Platinum - Posts: 5,816

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: December 03, 2004 at 6:11 AM / IP Logged

What's a woot?

Back to Top

winston_smith

Member - Posts: 41

Joined: November 17, 2004

Posted: December 03, 2004 at 9:23 AM / IP Logged

Woot as in wow it worked great, happy joy joy lol.

Back to Top

winston_smith

Member - Posts: 41

Joined: November 17, 2004

Posted: December 03, 2004 at 9:25 AM / IP Logged

12" Adire brahma

Back to Top

stevdart

Platinum - Posts: 5,816

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: December 03, 2004 at 12:48 PM / IP Logged

The scale of the hole seems to be off. An 11" hole shouldn't look that large on a 14.5 X 14.5 face. And the box appears taller than it does in width. Do you put in all measurements before the program renders a drawing? Do I understand that it sells for $495??

I found http://www.aecbytes.com/review/SketchUp4.htm for the answers to my questions. Yup, $495.

Back to Top

winston_smith

Member - Posts: 41

Joined: November 17, 2004

Posted: December 03, 2004 at 2:21 PM / IP Logged

Yep, i have the demo version. I have 6 hours time left. and your right the hole is not to scale it's 12". The box is 16"H 16"W 14"D

And i can confirm it i have the boards all cut out and drilled. Gunna be putting it togather very soon.

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 03, 2004 at 4:58 PM / IP Logged

should work great, let us know when and if you are ready to go vented.

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Would it came out right

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.