Punch 700s bridging?

Home / the12volt's Install Bay / Car Audio / Punch 700s bridging? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

turbotyphoon69

Member - Posts: 16

Joined: December 16, 2004

Location: United States

Posted: December 21, 2004 at 12:44 PM / IP Logged

Does any one have an owners manual, or know where to find the diagram on how to wire the outputs for bridging? i searched off of google and i didnt find a thing!

1993 GMC typhoon pearl white- 3in drop with 18s

1996 Grand Cherokee frost white- Lifted on 20in Rims and 33in All Terrain KO's

Back to Top

Search for other posts by turbotyphoon69

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 21, 2004 at 2:17 PM / IP Logged

The bridging twrminals should be the outer left pos and outer right neg...both will be on the outer sides. The recomended load on these amp is a 2 ohm minimum

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Punch 700s bridging?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.