bad ground?

Home / the12volt's Install Bay / Car Audio / bad ground? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

vlamz24

Member - Posts: 19

Joined: September 20, 2004

Posted: March 25, 2005 at 9:22 PM / IP Logged

Could a bad ground be the cause of no power to my amp?

Back to Top

racer427

Silver - Posts: 381

Joined: August 04, 2004

Location: United States

Posted: March 25, 2005 at 9:59 PM / IP Logged

U will need to check a few things.

1st I would check the remote wire.

2nd Do an Ohm test on the ground cable. You should have less than 1ohm resistance.

3rd check and fuses in the amp or power cable.

4th Do a voltage check on the power cable.

If all is good there, then U most likely have a problem with the amp itself.

Chris

Alpine CDA-9833 HU

Diamond Audio M661 Components

MTX Thunder T6.6 Components:rear fill:

Cadence Q400 4 Channel Mains + rears

Thunder 801D Subs

MTX 1004 10's

Dual 4g wire to rear

4g grounds

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bad ground?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.