Can't get my Line Output Converter Workin

Home / the12volt's Install Bay / Car Audio / Can't get my Line Output Converter Workin (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Bmccoupe

Member - Posts: 20

Joined: March 15, 2005

Location: United States

Posted: March 26, 2005 at 2:57 PM / IP Logged

I can't get my LOC to work right... My amp's up and running though... not getting voltage on either RCA channel.

I double/triple checked my wiring. Looks right. I'm getting voltage on every speaker wire input. I'm using RCA as outputs and no signal coming through on the RCAs.

Should i be grounding the black wire also, I've tried grounding it and it still does not work.

I'm using a Peripheral SVEN4 LOC and a phoenix gold amp.

Back to Top

face

Member - Posts: 7

Joined: January 13, 2004

Location: California, United States

Posted: March 26, 2005 at 3:12 PM / IP Logged

it sounds like a bad loc but you dont have to ground the black wire unless you have engine noise; the black wire is a ground loop isolator sorry no other advice

The One And Only

Back to Top

Chad7n7

Silver - Posts: 408

Joined: March 09, 2004

Location: United States

Posted: March 26, 2005 at 3:34 PM / IP Logged

What type of vehicle, and is it equipped with a factory amp??? If so, where are you grabbing your signal from before of after amplifier??

To give you an idea of where I am going with this, if you do in fact have a factory amplifier, then you should be grabbing your signal after the amplifier, not before. If you do grab it before, you will get nothing.

Back to Top

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: March 26, 2005 at 4:56 PM / IP Logged

sounds like LOC is bad

Back to Top

Bmccoupe

Member - Posts: 20

Joined: March 15, 2005

Location: United States

Posted: March 26, 2005 at 6:47 PM / IP Logged

I think the LOC is bad... I'm grabbing the signal after the factory amplifier. The weird thing is before I got the amp issues worked out, i was getting voltage from the RCAs.

How could my LOC have gone bad though?

Back to Top

Bmccoupe

Member - Posts: 20

Joined: March 15, 2005

Location: United States

Posted: March 26, 2005 at 6:49 PM / IP Logged

It's on a BMW Z3 Coupe with Harman Kardon factory sound. by the way.

Back to Top

Bmccoupe

Member - Posts: 20

Joined: March 15, 2005

Location: United States

Posted: March 26, 2005 at 9:00 PM / IP Logged

I switched out to a new LOC, and it worked. Thanks!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Can't get my Line Output Converter Workin

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.