2 ch amp dvc sub

Home / the12volt's Install Bay / Car Audio / 2 ch amp dvc sub (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shkeel

Member - Posts: 25

Joined: February 23, 2005

Location: United States

Posted: June 14, 2005 at 11:47 PM / IP Logged

Is it bad for the sub if u take a 2 channel amp and run one channel to one voice coil and the other channel to the other voice coil? Do they both have to be mono?

94 Camaro Z28

Jensen 7" Indash-DVD/mp3/tv

Rockford ChromeSeries 600/2

Power Accoustic 12" Dvc700rms

Rockford Power T162C

JLaudio 6.5" 75rms

PS2 Slim hardwired

Lightning Audio 1 Farad Cap

Back to Top

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: June 15, 2005 at 12:12 AM / IP Logged

its ok to do that but the amp will feed the sub wierd as far as running stereo to one sub. ive done it before with no problems. keep the balance centered up.

Back to Top

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: June 15, 2005 at 12:27 AM / IP Logged

Or, if you are that worried about it, wire the voice coils in series, and bridge the amp. The net impedance is the same, and you don't have to worry about it...

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 ch amp dvc sub

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.