Brutus 1000d mono amplifier question

Home / the12volt's Install Bay / Car Audio / Brutus 1000d mono amplifier question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dmkicker

Member - Posts: 6

Joined: June 17, 2005

Location: United States

Posted: June 17, 2005 at 10:05 AM / IP Logged

in the owners manual it states 2 ohm load 350 x 1 . the amp has two channels does this mean it has 350 watts per channel or 350 watts for both channels? this is a mono amp . and is it better to wire to a lower ohm rating or hire.

Back to Top

SoundAudio

Copper - Posts: 242

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 26, 2004

Location: United States

Posted: June 17, 2005 at 10:14 AM / IP Logged

The amp only has one channel. It has two sets of speaker terminals so you can cleanly connect two woofers to it in parallel. The rating given is 350 X1 @2 ohm, therefore witha 2 ohm load the amplifier will put out 350 watts. The lower the impedence rating the better. I believe it is stable to 1 ohm. Good Luck!

Back to Top

Nodestiny

Copper - Posts: 85

Joined: May 26, 2005

Location: United States

Posted: June 17, 2005 at 10:33 AM / IP Logged

correct. At 1 ohm it is rated 1000 watts... realisticly its more like 900 watts, unless you have a solid electrical system. Both + are connected internaly, and both -s as well. So just get er down to 1 ohm and youll be pullin some good power then. I have had these amps down to 1/2 ohm without a problem (other than they get very hot.)

04 dodge neon SXT

(2) Oz Audio Matrix Elite 12"s sealed in 4 cube fiberglass enclosure, powered by HiFonics BX1605D

Oz Audio Matrix 180cs 6.5" component set power by HiFonics ZX4000

Back to Top

dmkicker

Member - Posts: 6

Joined: June 17, 2005

Location: United States

Posted: June 17, 2005 at 10:40 AM / IP Logged

thank you for the info

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Brutus 1000d mono amplifier question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.