Almani Subs and Amp

Home / the12volt's Install Bay / Car Audio / Almani Subs and Amp (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Elizstoy

Member - Posts: 38

Joined: August 29, 2002

Location: California, United States

Posted: September 23, 2005 at 6:34 AM / IP Logged

I just bought a pair of these subs from some guy in Ventura really couldnt pass on the price. Any one have anything good or bad to say about them they came in a sealed 1.5 cubic ft box each. Needed some power to see if they could handle the 1000 watt peak 500 watt RMS they state in their web site URL below.

http://www.almaniaudio.com/specs.asp?itemnum=ALWB12

So i just picked up Friday a KOLE HK960-4 for $50.00 specs are

HK960-4- chnl: 4 *4ohm RMS-100X4 *2ohm RMS-125X4 *Mono RMS-250X2 *

Bridged Max-960 *Dimension W”xH”xD”-14X3.3X9

Website URL -http://www.koleaudio.com/products_amplifiers_hk.html

Was going to run Amp by bridging the four chnl to a two chnl RMS 250 watts to each speaker. Any pros or cons on these items Thanks Almani Subs and Amp -- posted image.

sneakycyber

Silver - Posts: 413

Joined: September 13, 2005

Location: United States

Posted: September 23, 2005 at 11:51 AM / IP Logged

NeVa heard of em' but they look prety kewl. Let us know how they sound Almani Subs and Amp -- posted image.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: September 23, 2005 at 11:52 AM / IP Logged

I don't know much about Almani. A relatively new company. Their speakers are made for them in China, but I've never heard them. Probably typical SPL-only quality. Blue anodized, ooo, pretty. Kole is part of SPL which is part of Power Acoustik. For driving subwoofers, could be adequate as long as you do not over-drive the amp. Low-end amplifier that I definitely cannot recommend for your mains.

Support the12volt.com

Elizstoy

Member - Posts: 38

Joined: August 29, 2002

Location: California, United States

Posted: September 23, 2005 at 11:44 PM / IP Logged

Thanks for the posts will let you know haw they sound. DYOHN try my best not to hoping the 250x2 will pump these. If not any advice on a good ass amp that would put out a stable 400 watt per channel?

Blowntweeters

Silver - Posts: 650

Joined: June 03, 2005

Location: Nevada, United States

Posted: September 24, 2005 at 11:26 AM / IP Logged

are those subs dual 4 ohm ?

1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

pimpincavy

Silver - Posts: 880

Joined: May 20, 2004

Location: United States

Posted: September 24, 2005 at 4:20 PM / IP Logged

Thats a strange looking amp....

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: September 24, 2005 at 4:27 PM / IP Logged

Elizstoy wrote:

Thanks for the posts will let you know haw they sound. DYOHN try my best not to hoping the 250x2 will pump these. If not any advice on a good ass amp that would put out a stable 400 watt per channel?

In what kind of price range? Actually, depending on how you use those woofers, the Kole might be perfect for them.

Support the12volt.com

blackmica3

Copper - Posts: 128

Joined: August 07, 2005

Location: United States

Posted: September 24, 2005 at 7:06 PM / IP Logged

ALWB12= single 4 ohm voice coil

blackmica3

Copper - Posts: 128

Joined: August 07, 2005

Location: United States

Posted: September 24, 2005 at 7:08 PM / IP Logged

MTX 421D amp at 2ohm mono = 420 watts

http:///.com/MTX-THUNDER-421D-420W-MONO-AMPLIFIER-BRAND-NEW_W0QQitemZ5810810495QQcategoryZ18797QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Elizstoy

Member - Posts: 38

Joined: August 29, 2002

Location: California, United States

Posted: September 24, 2005 at 9:33 PM / IP Logged

They are duel voice coil there are a pair positive and negative connections on both sides of the subs i will see if i can get a pic of them do not know the Impedance of each coil i assume its 4

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.