relocation harness

Home / the12volt's Install Bay / Car Audio / relocation harness (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hattster

Member - Posts: 10

Joined: December 30, 2005

Location: Canada

Posted: December 30, 2005 at 6:55 PM / IP Logged

Well i got all the connection needed in relocating my stock deck in a 02 alero how ever I can't figure out why the new deck won't go on it will just go on when i connect the red wire to the yellow constant. But when connected to the red on the harness nthing happens. What do I have to connect that red wire to turn on and off with door and ignition

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: December 30, 2005 at 6:57 PM / IP Logged

check the fuse for the radio in the vechiles fuse box you may have poped it when in stall.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

hattster

Member - Posts: 10

Joined: December 30, 2005

Location: Canada

Posted: December 30, 2005 at 7:48 PM / IP Logged

nope the fuse is fine

fingaz22

Silver - Posts: 410

Joined: March 11, 2005

Location: United States

Posted: December 30, 2005 at 8:00 PM / IP Logged

well what kind of harness did you use?what brand? you need to find out why there ain't no power there. well actully you need to get a multimeter and check for voltage at the red wire and see what you have for voltage if any. then trace the wire back to the fuse and see if you have voltage coming out at the fuse the fuse could look good but be bad. so check with a meter or test light. if still ok then the wire for the aftermarket harness could be in the wrong place in the connector or you have a bad power wire. if it worked befor i would say its in the wrong location on the harness connector. and will need to do some test with the meter to find where it is or the route of the problem.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

hattster

Member - Posts: 10

Joined: December 30, 2005

Location: Canada

Posted: December 30, 2005 at 8:11 PM / IP Logged

Ihave the harness BHA2204T Best KITS & Harnesses from bestbuy i doublechecked on the internet and this is the proper kit for my car. The red wire in the deck is ok cause when connected to the contant yellow wire the deck powers up. However when connected to the red wire and car started nothing happens. But is there any other way to test it instead of testing the wire for valtage. Could I just cut the red wir from the harness on both sides then connect the red one without harness?

forbidden

Platinum - Posts: 5,352

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: December 30, 2005 at 8:21 PM / IP Logged

Was your door opened or closed when you were testing this?

Top Secret, I can tell you but then my wife will kill me.

hattster

Member - Posts: 10

Joined: December 30, 2005

Location: Canada

Posted: December 31, 2005 at 4:17 AM / IP Logged

closed

fingaz22

Silver - Posts: 410

Joined: March 11, 2005

Location: United States

Posted: December 31, 2005 at 7:11 AM / IP Logged

at this point i need to suggest to take it to the local radio shop if you don't have access to a meter.

if you still don't want to do that then run your own switched power to the hu from the fuse box or even better the ignition just make sure you fuse the wire with a 10 amp fuse and use a source thats off when the trucks off and on when in acc.

use a test light if you cant use a meter they are cheap,multimeters are cheap too. always confirm the wire in question before you connect anything to your car.

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

relocation harness

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.