Kenwood Ez500 Preouts

The manual says that in order to get some of the functions to work on the deck that in the menu you have to switch it from rear preouts to SWpreouts.... the deck itself only has front and then another set which are determined by how the deck is setup... the manual doesnt say how to change between rear and SWpreouts.... any ideas?

thanks,

Kevin

Pretty sure it tells you in the mannual, and you answered the question in your post.  For use of sub out put, you switch the preout in the menu.

Not having the mannual in front of me, you put the deck in standby , enter the menu, scroll down to rear pre out. then switch between rear or sub. Turn on deck, use menu to adjust crossover point.