how to run a 200 amp stinger isolator

Home / the12volt's Install Bay / Car Audio / how to run a 200 amp stinger isolator (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

prophesybh

Copper - Posts: 78

Joined: July 04, 2005

Location: United States

Posted: February 11, 2006 at 4:18 PM / IP Logged

I was woundering if anyone know's how to setup a 200 amp stinger isolator. It has intructions but there pretty vauge, I know the two bit posts are for the batteries, and one of the smaller posts is for a ground, but what do i run on the other smaller post. Thanks in advance for any help.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: February 11, 2006 at 7:51 PM / IP Logged

It's just a big relay, so if you ground one of the little posts, you have to feed power to the other one to trigger it. Whenever it recieves 12 volts, it'll activate the coil, and the contacts will close.

My ex once told me I have a perfect face for radio.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to run a 200 amp stinger isolator

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.