pics ’04 Alero

Not sure how this is going to look. But here are the early install pics. I was going to do fiberglass, but did not have enough time. Aside from the sub box everything was built, carpeted, and installed in 24 hours! Some of the system has changed since these pics, so I hope to have new pics soon.

H/U - stock - with stinger line out converters for ft. and rr. channels. 

Door speakers - JL audio 5.25", but changing to Alpine Mids and tweets with custom pillar pods for the tweeters.

Rear speakers - 6" JL audio - I cut 1/2" mdf plates to fit into stock mount plates and then installed the JL's inside those. This was a quick fix I had DDDrive 6x9's, but they seperated from the basket.

Subs - 2 X12" Clif Designs CD120C I went from PPI PC12's and these CD's walk all over them.

Sub amp - I have changed this since the picture, now I run a Hifonics Brutus BX2005D handles these subs no problem!

Front amp - Sony Xplod

Rear amp -  MTX 

The box on  the right houses my battery, Stinger Isolater, Fan, Digital Temp gauge for sub amp, and distribution block for turn on leads. On top is a VooDoo capacitor.

On the left under the amps, is a VooDoo digital distribution block for the amps. And a crossover.

All power, ground, speaker, RCA wire is VooDoo. As well as my terminals. There is a Voodoo fuse block under the hood, as well in the trunk.

I built a false floor for everything to sit on with a half inch rise to run all the wire.

So there it is, let me know what you think. I hope to have the mentioned modifications done soon along with some new pics.

Looks...interesting.  Look here to see what I mean.

The path to your images were pointing to files on your hard drive and not to any files on line. Please try adding your images again.

the12volt • Support the12volt.com