upgrading speakers

Home / the12volt's Install Bay / Car Audio / upgrading speakers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cgkmark

Member - Posts: 25

Joined: March 07, 2006

Posted: August 07, 2006 at 4:57 PM / IP Logged

I have a 94 Toyota Tercel and I went to change the speakers in the front door panels...they were 4" but the 4" speakers i found were all to deep to install...so instead I decided seeing I was going to need to manufacture something I got some 5.25" speakers...now does anyone have any tips on what to use? (how to make) spacers for these speakers to fit?...if you need more info let me know

Back to Top

killer sonata

Silver - Posts: 718

Joined: May 17, 2006

Posted: August 07, 2006 at 5:03 PM / IP Logged

mdf spacer. just cut a piece to fit and screw it in. easy as pie.

Back to Top

cgkmark

Member - Posts: 25

Joined: March 07, 2006

Posted: August 07, 2006 at 5:07 PM / IP Logged

seeing as though its a big bigger...it might not fit into the panel like that...can you get thicker stuff that could be cut on an angel?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

upgrading speakers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.