Pioneer AVIC-Z1

Home / the12volt's Install Bay / Car Audio / Pioneer AVIC-Z1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

opacheco

Member - Posts: 5

Joined: August 14, 2006

Location: Canada

Posted: August 14, 2006 at 2:48 AM / IP Logged

I was wondering if someone can help me.

I'm installing a Pioneer AVIC-Z1 on a 2003 Kia Sorento EX, I bought the wire harness kit,

I've installed the system but I get no sound from the Speakers, I’ve checked all the connections every thing seems ok.

I know that the system works I had it checked out.

Is there anything I've missed?

Thanks in advance

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 14, 2006 at 9:40 AM / IP Logged

Does it power up?

Support the12volt.com

opacheco

Member - Posts: 5

Joined: August 14, 2006

Location: Canada

Posted: August 14, 2006 at 10:18 AM / IP Logged

Yes everything powers up I just get no sound.

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 14, 2006 at 10:45 AM / IP Logged

Does the vehicle have a factory amplifier that must be bypassed? Have you tested the speaker wires to make sure they are all good?

Support the12volt.com

opacheco

Member - Posts: 5

Joined: August 14, 2006

Location: Canada

Posted: August 14, 2006 at 10:06 PM / IP Logged

Yes the Vehicle as a factory Amplifier, the speakes and the wiring is all good

Can you use the amplifer or do have to bypass it, if so how do bypass it?

Thanks

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: August 14, 2006 at 10:10 PM / IP Logged

You might just need to hook up the blue wire on the factory adapter harness to the blue/white wire on the pioneer harness

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

opacheco

Member - Posts: 5

Joined: August 14, 2006

Location: Canada

Posted: August 15, 2006 at 12:55 AM / IP Logged

Ravendarat

I don't have a Blue/White wire on my Pioner, I got Blue wish is for the pwr antena

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: August 15, 2006 at 11:16 AM / IP Logged

OK then hook up the blue wire on the factory harness with the red ignition wires in the harnesses. That way it would trigger the amp when the car is turned on. Still, somewhere on the pioneer deck their must be a system turn on wire to hook up to amps for remote turn on. Thats the wire I would be looking for.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

opacheco

Member - Posts: 5

Joined: August 14, 2006

Location: Canada

Posted: August 15, 2006 at 11:38 AM / IP Logged

Thanks Guys for all the help

I've done that this morning and it worked great.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Pioneer AVIC-Z1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.