the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Alphasonik components, wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
phayzeone 
Member - Posts: 19
Member spacespace
Joined: October 17, 2005
Location: United States
Posted: January 03, 2007 at 7:33 PM / IP Logged  
I want to know if my components are wired correctly. The way I have it set up is each channel from the amplifier is connected to each crossover (- & +).
My question is what is the correct way to wire the components to get 125 watts RMS x 2 at 2 ohms from the amplifier. The way I currently have it wired, I believe I'm only getting 75 watts RMS x 2 at 4 ohms.
Setup:
Kicker KX250.2
75 watts RMS x 2 at 4 ohms
125 watts RMS x 2 at 2 ohms
250 watts RMS x 1 in bridged mode
Alphasonik PCZ65
4 Ohm impedance
Power Handling: 120 Watts RMS
The way I currently have it wired:
Alphasonik components, wiring -- posted image.
...but I think it should be wired like this:
Alphasonik components, wiring -- posted image.
3cc_installer 
Copper - Posts: 43
Copper spacespace
Joined: December 21, 2006
Location: United States
Posted: January 04, 2007 at 1:16 AM / IP Logged  
leave it like it is, i'm not sure why you would do it the other way?
Jared Nixon - A.K.A Jsmoke
3rd Coast Customs
Lake Charles, Louisiana
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: January 04, 2007 at 4:54 PM / IP Logged  
Both are the same wiring.  The terminals simply have two connection points, they are not DVC speakers.  You cannot wire these speakers for a 2-ohm load on your amp.
Support the12volt.com
godblessdremil 
Silver - Posts: 273
Silver spacespace
Joined: August 03, 2005
Location: United States
Posted: January 04, 2007 at 6:38 PM / IP Logged  
Ya there not designed to be wired at 2-ohm good speakers for the price but not designed to.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer