turn-on leads for mono channel sub amp

Home / the12volt's Install Bay / Car Audio / turn-on leads for mono channel sub amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gedukas.b

Member - Posts: 2

Joined: January 11, 2007

Posted: January 11, 2007 at 5:01 AM / IP Logged

I'm working on a 1991 mazda 323 audio system with infinity component speakers, a sony explod amp for 400W RMS subs, all run through a sony cdx gt100 receiver(is that the correct term?)

Do turn-on lead cables from my sub's amp get crimped or soldered with Constant 12V+ or the Switched 12V+.

Back to Top

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: January 11, 2007 at 10:37 AM / IP Logged

switched. see if your receiver has a remote turn on lead - typically blue with white stripe

we just crimp

Back to Top

soultinter

Copper - Posts: 170

Joined: January 16, 2004

Location: United States

Posted: January 11, 2007 at 11:05 AM / IP Logged

definitely use the turn-on lead from your head unit

Back to Top

gedukas.b

Member - Posts: 2

Joined: January 11, 2007

Posted: January 11, 2007 at 1:05 PM / IP Logged

thx a lot for the help. It was blue. stupid circuit city workers had cut the turn on lead when they "factory installed" the sony radio and decided to cut the connection from the turn on lead to the radio.

once again, thank you

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

turn-on leads for mono channel sub amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.