testing for mute

Home / the12volt's Install Bay / Car Audio / testing for mute (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

spielnicht

Member - Posts: 3

Joined: July 11, 2007

Location: United States

Posted: July 16, 2007 at 10:12 AM / IP Logged

I have a 2006 Jaguar X-Type. I would like to tap my external GPS unit to the Mute feature of the radio. Below are the schematics for the radio, and clearly on the second page it does show the Mute input. However, how do I test for this and determine which wire it is?

Jaguar X-Type Schematics

Thanks in advance.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 16, 2007 at 8:56 PM / IP Logged

According to the diagram Ground is pin 1 switched 12 volts is pin 2 Constant 12 volts is pin 11.

Verify these wire locations then it says the phone mute wire is pin 7. Hopefully this will be enough info for you

Back to Top

spielnicht

Member - Posts: 3

Joined: July 11, 2007

Location: United States

Posted: July 17, 2007 at 7:22 AM / IP Logged

you're not an idiot, but I am! I didn't know that the numbers corresponded to the pins testing for mute -- posted image.

I remember the location of the ground, power, and switch, and it is accurate. So the Mute should be where it says.

Now I can't wait to go home and test it out.

Thanks for the help!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

testing for mute

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.