the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cva 1005


Post ReplyPost New Topic
< Prev Topic Next Topic >
yota 1 
Member - Posts: 2
Member spacespace
Joined: September 03, 2007
Posted: September 03, 2007 at 9:28 AM / IP Logged  

Hey everyone I new to the forum Im woundering if somone can help me I recently got a new truck well new to me and wanted to put in my CVA 1005 I connected the brain harness to the radio harness and then attempted to connect the three wires from the unit into the radio harness everytime I turn on the ignition I pop a fuse.  So I tried just wiring up the unit to the radio harness the three wires Red...Yellow..Ground and nothing happends unit doesnt turn on Im woundering if somone out there has a facotry wiring diagram for the CVA 1005 maybe the pin are in the wrong spot on back of the unit ive searched and searched and only found user manuals not the install manual if anyone out there can help me with this prob I would be greatly appreciated the truck is in peices right now thanks

sarcomax 
Copper - Posts: 276
Copper spacespace
Joined: November 09, 2005
Location: California, United States
Posted: September 03, 2007 at 4:08 PM / IP Logged  
What kind of truck (guessing toyota, but judging by the rest of the spelling and punctuation you might have intended to make your user name Yoda) meaning year make and model, are you using a wiring harness to connect to the vehicle, are you blowing the fuse in the vehicle or on the unit, and do you have a multimeter?
yota 1 
Member - Posts: 2
Member spacespace
Joined: September 03, 2007
Posted: September 03, 2007 at 11:57 PM / IP Logged  
well sorry for the spelling was in a rush.  I figured the wiring out on the unit and now the screen does not want to motorize out and display anything almost like the screen is dead because none of the buttons work
sarcomax 
Copper - Posts: 276
Copper spacespace
Joined: November 09, 2005
Location: California, United States
Posted: September 04, 2007 at 11:50 AM / IP Logged  
So...Was I right about Toyota? If so, what year, and model? Were you using a wiring harness? Were you blowing the fuse on the vehicle? Were you blowing the fuse on the unit? Do you have a multimeter? Those are still the questions that we need answers too before any help will be offered. I now have new questions. Have you checked ALL of the fuses in the vehicle? Were you sorry for misspelling Yoda?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer