the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

punch 200ix trans ana crossover


Post ReplyPost New Topic
< Prev Topic Next Topic >
erock198 
Member - Posts: 18
Member spacespace
Joined: January 07, 2005
Location: United States
Posted: September 25, 2007 at 2:24 AM / IP Logged  

I saw on the back of my amp that I can cut the highs out.  How do I do this?  What frequency card would work for it.  I thought it had dip switches as the diagram kind of shows but I can't find them.

Does anyone know anything about this?

Thanks

E

i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: September 25, 2007 at 8:04 PM / IP Logged  

There are no DIP switches on that amp.  The crossover is controlled by the card that goes through the hole in the bottom cover.

If the amp is playing full range right now, you need to turn the system off,remove the card and turn it around.  If the components on that board are facing the RCA connections make them face the other way.   Put the board back in and turn it on.  If the amp is now playing only Highs, you will need to remove the card and turn it upside down. Leaving the board mounted components facing the same way.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 24, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer