3 mtx 4500

Hey all Just finish get a sub and box comb its 3 mtx 4500 that handels 250 per coil so it says it handel 675 rms total. So the back of the box says 4 ohm . now I want to get a amp that says 600 rms at 4 ohms. will this work or will my speakers show the amp 2 ohms thanks in advance.I JUST  GET CONFUSED ABOUT OHM doodie 

I did not understand that post, try retyping it a little s-l-o-w-e-r , if all your looking for is an amp with that specs, try the MTX 600/1MECP Certified

(2)Infinity 3.5" 3012CF

(2)Infinity 6x9 9612I

(1)Sony CDXGT710

(2)MTX TC510 and,

A load of dynamat!

1982 Chevy Cavalier

okay here we go I have a comb sub and box. were you pulg in the spearker wires it says 4 ohm. now i want to use the power which total 675. I found a amp that says 600 RMS at 4 ohm. if i have a 4 ohm total subs ( All 3 subs ) and I hook it up to the amp that is stable at 4 ohm and produces 600 RMS at 4 ohms. Will that set-up work. or by hooking this up while the amp really e at 2 ohm. You get what i'm trying to say ?

The box was made for the subs they are wiredup in series. its actually from crutchfield thats why I just want to use it the almost the fullest.... Thanks so much for your input....!

crap I mean use it to the fullest. I have to type fast i'm at work.

Look, if you haven't rewired any thing, and it states 4 ohms on the box, then get an amp that produces roughly your RMS power (600-700 watts) @ 4 ohms.

Thank you dwarren thats what i wanted, also thanks jl.w7

Your best (less expensive) option would be to get a 2channel amp that puts out about 600watts RMS x 1 (bridged) @4ohms. If you were to get a mono (1channel) amp, you'd be paying more for it cause it can put out more power @ 2ohms, etc...2013 Kia Rio -90a alternator

DDX470HD GTO14001 GTO1014D (x3)

Big3 in 1/0G

1/0G to GTO14001