Old Setup And The New one

On the old setup i used to run 3 mofo 15's. 3 1800 D class power acoustik amps for the subs one four channel and one 2 channel for the mids and highs. Two pairs of component sets and two pairs of 4x6 All of that was pushed by 5 optima yellow tops. Custom build fiberglass consol that hold 2 6.5 and 2 tweeters along with the head unit. I relocate the head unit so i can run a dvd touch screen up front. After the consol was done I decided to build an enclosure to hold 2 pairs of 4x6 so I can have rear fill sound. Custom built tweeter pods for the doors components. All of this was inside a four door dodge neon. Pictures of new setup coming soon. Sorry that I did not take any pictures during the fiberglass. Picture bellow.

DAMN, is the new system as Big as that one. That thing must make you forget what you are thinking about.99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

please tell me its for compitition only , not an every day driver right? can you hear me now? looks good thoyeh? i can do that?

see! told ya!

Already. Yep that was a daily driver. The only reason why I changed the setup was because of the weight and I did not want to upgrade to airbags or air struts. Was bumping hard. The new setup consists of only 2 1800 D class power acoustik amps links into one that pushes out around 3000 rms 2ohm to 4ohm. All that power is being used by 3 10 inch Power Acoustik fx series subs (800rms dual 4 ohm each) in a ported box that 2.6 cubic feet. Big change from 10.2 cubic feet from the last setup. I still ended up using four batteries in the back. For mids amp I only kept the four-channel amp to run the components in the consol and the doors. Had to get rid of the 4x6 consol because now a finally have a back seat. Let me tell for that small of a box and the subs being 10s I am very very impressed. I can not figure out how to post the new pictures. Please help so i can post them

it is not shared. one chamber two ports one sub