the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Bridging Boss Audio MR1308UABK Head Unit


Post ReplyPost New Topic
< Prev Topic Next Topic >
--weezl-- 
Member - Posts: 45
Member spacespace
Joined: September 12, 2011
Location: Alberta, Canada
Posted: April 11, 2023 at 5:09 PM / IP Logged Link to Post Post Reply Quote --weezl--
I've been so ng the Google, and can't answer my questions...
First, the info. It's going on a 2013 Harley Electra glide police, I have a MR1308uabk boss audio marine head unit, and hogtunes 352f-aa speakers.
The questions:
The speakers are rated at 100w rms, 150w peak, the HU is 4x 50w. Can I wire together, front/rear, -/+ for left and right, as my Electra does not have rear speakers? I feel like this should work, and should be able to give me 100 Watts dual channel. Correct?
Second question, the HU states 4ohm+, and my speakers are 2. I understand what this means, but because you're sharing one impedance with two amplifiers, in the above bridged situation, does this counteract my low impedance issue? Logic tells me that the impedance would be split over two channels, and effectively would be 2x 4 ohm parallel speakers, which is what the HU wants. Do I have this correct?
Are there any other issues or things I've missed?
Worst case scenario, I will wire it up just two channel, with HU rears left disconnected, and will install a resistive something... Either a resistor or something similar that I've seen a few places mention is a good fix for speakers too low of impedance, to the HU.
Thanks in advance!
Pics for attention! https://www.instagram/p/CqhOcdcrQg9/igshid=YmMyMTA2M2Y=
no signature needed
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: April 12, 2023 at 8:26 PM / IP Logged Link to Post Post Reply Quote i am an idiot
The 4 x 50 you speak of is actually 4 x 18 or so. The output chip of the radio does not work like bridging a bridgeable amplifier.   No matter how you wire it, you will not get any more power out of it.
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer