pass button fused for remote switch

Home / the12volt's Install Bay / Motorcycle Electronics / pass button fused for remote switch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: May 20, 2007 at 4:00 AM / IP Logged

I have a motorcycle that I would like to hardwire my garage door opener to. I would like to press my pass button (basically flash my brights) and use that 12 volt trigger to activate my normally 3 volt battery powered opener. I know that I can wire up a relay to incorporate the battery aspect, but I don't want to have to swap out the battery. Is it safe to do this with just a resistor? and if so, what size?

Back to Top

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: May 21, 2007 at 11:35 AM / IP Logged

got off my lazy butt and figured it out. thanks for the overwhelming response. pass button fused for remote switch -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pass button fused for remote switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.