Kenwood KMR322BT Install

Home / the12volt's Install Bay / Marine Electronics / Kenwood KMR322BT Install

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jt1313

Member - Posts: 1

Joined: July 16, 2019

Location: New Jersey, United States

Posted: July 16, 2019 at 2:40 PM / IP Logged

Hello everyone! I have a marine stereo configuration question. I've installed a Kenwood KMR322Bt head unit to a JL M700 Amp that is running a JL subwoofer, and a set of JL7.5 and JL 6.5's aft (outside) these speakers were wired through the amp and they sound great....my problem or question is the front (cabin) speakers I wired directly through the head unit giving me no control over volume, fade balance etc......I'm guessing I wired it wrong....any suggestions?

thank

jt

threeqz is online now Report Post

jt

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 17, 2019 at 7:37 PM / IP Logged

Do the cabin speakers play at all? Which wires of the radio did you connect them to?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.