fortin int sl

Home / the12volt's Install Bay / Car Security and Convenience / fortin int sl (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Memphisman

Copper - Posts: 161

Joined: September 29, 2002

Location: Pennsylvania, United States

Posted: January 17, 2008 at 6:15 PM / IP Logged

Is anybody having problems with the Fortin INT-SL bypass Module? I recently started using them and everyone of them has come back with the same problem. After being used for 3 or 4 days, when you use the RS you cant shut the vehicle down with the brake or key. You have to let it run its preset time.

johnmax

Copper - Posts: 131

Joined: November 15, 2003

Posted: January 17, 2008 at 7:22 PM / IP Logged

I've used a couple. Havent seen that, but did have a CTS that it would not bypass if left sitting for a while.

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: January 17, 2008 at 7:27 PM / IP Logged

sounds like your starter is not seeing your brake output

are you using output from your brake switch or your bypass

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 17, 2008 at 7:29 PM / IP Logged

What version numbers do you have ? Are the version numbers the most recent for the vehicles that they're installed into ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Memphisman

Copper - Posts: 161

Joined: September 29, 2002

Location: Pennsylvania, United States

Posted: January 17, 2008 at 8:10 PM / IP Logged

I'm using the ouput from the bypass and the version I have is 2.5.

johnmax

Copper - Posts: 131

Joined: November 15, 2003

Posted: January 18, 2008 at 2:43 PM / IP Logged

Yeah sounds like the brake output of the module is messed up. Wire it up to the brake switch.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 18, 2008 at 3:32 PM / IP Logged

just wire it the brake switch. its a one min job and its more reliable. i never rely on outputs from datakits such as tach, hoodpin and brake output. on Fortin SL2, the tach output is wack, it works at times and sometimes it just doesnt work ahah hope they fixed this.

dswift

Copper - Posts: 396

Joined: March 12, 2007

Location: United States

Posted: January 18, 2008 at 3:49 PM / IP Logged

never heard of this issue. But i'll note it. How many INTSL you've installed and the brake switch doesnt work.

"dont ground out!"

Memphisman

Copper - Posts: 161

Joined: September 29, 2002

Location: Pennsylvania, United States

Posted: January 18, 2008 at 8:26 PM / IP Logged

I've used 7 so far. All came back.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 18, 2008 at 9:40 PM / IP Logged

use 4. had issues with tach mostly and the hood status. it kinda lags like you can open the hood and almost 20 seconds after it will trigger.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.