domelight, horn and trigger

ok i'm installing a viper alarm 5900 on a 2000 lincoln town car, i'm having some problems with it, first problem is my horn is not working next problem is domelight supervision wire and trigger....

ok here is how i got it wired

horn........................

85 (-)wire from alarm

86 (+) 12v

30 (-) horn wire

87 (-)ground

domelight ......................

85 (-)domelight supervision wire from alarm

86(+)12

30(+)domelight wire

87(+)12v

also the alarm does not activate by itself it only activates when i use the remote

any help is greatly appreciated

btw if this is posted twice is because i posted it one time and it didn't show up

ok horn is not working at all not even when i activate alarm

and i'm using the wire on the uderdash light drivers side can't remember the color blue black i think

my other problem is the alarm not arming by itself

Do you have the alarm programed for passive arming? Is the horn working any other time? If your horn isnt working period, then you have the relay wired up wrong. This is how my alarm manual says to run the relays for domelight and horn.... Both of these work on my car so I know these setups are correct.....

Horn:  pin 86 goes to - horn output                                                                        

        pin 87 goes to horn wire

        pin 85 goes to a constant 12V+

        pin 30 gets grounded

Make sure your horn wire is actually negative polarity.  If it is positive then change pin 30 from ground to constant 12V+ also.

Domelight:

           pin 86 goes to - domelight output

           pin 87 goes to domelight wire

           pins 30 and 85 go to a constant 12V+

ok yeah i have my wiring done wrong..............i'm going to wire it like you have it....

oh and the alarm does trigger when i open the door, hood, etc.  but what i mean is that it doesn't arm by itself  i think i have to program it for passive arming or something like that the thing is that i don't know how to do that.

valet mode? yeah never tought about that.... maybe it is in valet, anyway i got the domelight supervision working but still can't get the horn to work, its connected right  i don't know what to do now i think i'm just gonna leave it like that, oh and one more question when i arm the alarm and i turn the engine on with the remote, and someone opens the door isn't suppose to page?    because it doesn't it only tells me when i push the "lock" button...