python 880 led's stay on

I recently removed the Pioneer D3 and a few other things from my truck.  When I completed removing that stuff, the LED's from the Python 880 alarm came on and will not go off.  I've put it in and out of valet mode and the LED's never went off, so it's not in valet mode.  It's been like this for a week and for the life of me I can't figure it out.  There's nothing in the trouble shooting guide about this.  Any idea's?

are the valet wires pinched??Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

if all other functions of the system appear normal... u might have a defective led output on the system.. or a bad led...... not a big deal.... u could wire up another led... like a street glow or something or one from radio shack to the orange ground while armed, and of course constant and turn on.... the orange will be the trigger when the system is armed... it will do the same thing.......there can be only one.......

normally there are not 3 leds off of one output on DEI pieces.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya