prestige as9075 remote start programming

As long as it's already installed correctly, you shouldn't need to do any further work on the 9075. It has no antenna or receiver of any kind. All it does, is "watch" the wires that go to the doorlock motors in the doors. When it "sees" the doors lock, and then ONLY the driver's door unlock, and then the doors lock again, it should remote start. So basically, just press "lock, unlock, lock" on the factory remote, and see if it works. Also, somewhere under the dash somewhere (maybe in plain view, or maybe hidden), is a small toggle switch. If it's in the "off" position, the remote start won't work, so make sure it's on. P.S. Sorry if I wasn't clear about the remote thing. If your truck already has working factory remotes, you're all set. If you don't have working factory remotes, buy one and program it to the truck. I'm not sure if there's a procedure to do that by yourself, or maybe you'll need to go to a locksmith or Ford dealer.