the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 160XV Keyless Entry Doesn¡¦t Work


Post ReplyPost New Topic
< Prev Topic Next Topic >
spetrola 
Member - Posts: 6
Member spacespace
Joined: October 21, 2007
Location: Maryland, United States
Posted: June 27, 2008 at 11:26 AM / IP Logged  
Help, I replaced the battery in my 2002 trailblazer and now the keyless entry part of the 160xv doesn't work. When I hooked the new battery up the doors locked and unlocked 3 times as soon as it got power and now they do nothing. The lights blink and horn honks if you press the 1 or 2 button like it should, but it doesn't attempt to lock or unlock the doors. The remote start still works though. Any suggestions or where to start troubleshooting? I checked all the fuses and they are all fine. I am going to check the green and blue wires tonight and see if they still pulse and if so i guess I will trace them farther.
Thanks,
Scott
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: June 27, 2008 at 1:36 PM / IP Logged  
the door lock interface most likely needs to be reprogrammed. any idea which one was used? dei 457g, 1700g, xk 01, etc.
spetrola 
Member - Posts: 6
Member spacespace
Joined: October 21, 2007
Location: Maryland, United States
Posted: June 27, 2008 at 2:06 PM / IP Logged  
I will look when i get home it is way up under the dash and at 2am with a flashlight between my teeth I had had enough and when the flashlight battery quit working.
Thanks again,
Scott
spetrola 
Member - Posts: 6
Member spacespace
Joined: October 21, 2007
Location: Maryland, United States
Posted: June 27, 2008 at 10:19 PM / IP Logged  
The module is a 455g and if I unplug the battery for 10 min or so it does the same unlock lock unlock lock unlock but then nothing. Is there anything that can be done to the module or should I just replace it? I talked to the installer and he said that sometime when changing the battery they can get confused and lock up. Any good places to buy this module?
Thanks,
Scott
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: June 28, 2008 at 1:43 PM / IP Logged  
just needs to be reprogrammed. i can't recall the procedure right off hand to reprogram it though. been years since i've used a 455g

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer