autopage keyless.

Home / the12volt's Install Bay / Car Security and Convenience / autopage keyless. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mdoffroad

Member - Posts: 33

Joined: January 17, 2005

Location: Maryland, United States

Posted: July 08, 2008 at 8:42 PM / IP Logged

Ok, Its admitedly been more than a few years since I tackled oneof these.....

Autopage Keyless system KE-120, going into a Chrysler Cirrus with the goofy locking system that requires 2 hotwires, each with differnt values, 620 ohm to unlock and 2700 ohm to lock. Its been TOO long and this thing has onboard relays.... anyone? please, help?

Matt

Back to Top

mdoffroad

Member - Posts: 33

Joined: January 17, 2005

Location: Maryland, United States

Posted: July 08, 2008 at 10:15 PM / IP Logged

Sorry,it's a 2000 Cirrus, someone, anyone? help?

Matt

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 08, 2008 at 10:28 PM / IP Logged

Here You Go

This shows only a single wire for both lock and unlock. I think the wire needs to be grounded through the resistors for the appropriate function. Hopefully somebody a little more familiar with alarms can confirm this.

Back to Top

mdoffroad

Member - Posts: 33

Joined: January 17, 2005

Location: Maryland, United States

Posted: July 08, 2008 at 10:31 PM / IP Logged

Lol, I got that part, but I think I also got teh alarm figured, teh diagram wasnt the clearest, but I THINK I got it.... I havent read a wiring schmatic in almost 4 or 5 years.... sad, I know....

Matt

Back to Top

smcshark

Member - Posts: 34

Joined: June 22, 2008

Location: Ontario, Canada

Posted: July 09, 2008 at 9:35 AM / IP Logged

you should first determine if the car has factory alarm or not. It will determine if it is (GREEN/ orange w/450ohm & 850ohm) or White / lt green with the values you have already.

Automotive Electronic Specialist

Back to Top

mdoffroad

Member - Posts: 33

Joined: January 17, 2005

Location: Maryland, United States

Posted: July 09, 2008 at 4:31 PM / IP Logged

I pulled the build sheet and didn't see keyless entry or factory alarm on the sheet anywhere. I think I found my own answer though. I posted that when my brain was fried.... basically need both door relays powered by a hot wire and they both go to the same wire, one with one resistance,one with the other.... I need ot do that, wire the parking lights and a relay for a truck release and I'm set :)

Matt

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autopage keyless.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.