2004 toyota highlander and autopage rs900

Home / the12volt's Install Bay / Car Security and Convenience / 2004 toyota highlander and autopage rs900 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cerivera

Member - Posts: 15

Joined: January 09, 2004

Location: United States

Posted: October 12, 2008 at 12:59 AM / IP Logged

Went to install it this weekend, everything went smooth until the end

Cleaned up all the wiring, closed everything up and went for the final test...bam car turn on everything looks good...then horn starts as if its stuck...i think ooo oh not good. Unplug battery, plug back in.

alarm acting funny...now it arms, disarms...but horn doesnt sound only siren(although car horn is ok)....then remote start wont start...it cranks but wont start (it starts ok w key)...I noticed now after the incident when it trys to start no lights light up on the dash...before the incident the light were lighting up before it cranked....this car doesnt have oem security nor transponder...

The tach looks ok, I relearned it so dont think its the tach...

The last few wires I had messed with was connecting the dome supervision to the green wire of the key ring light.....could this have done something?

I didnt use taps for the main wires....I used a t-harness

Anyone think a blown fuse?

Ive done one or two remote starts in the past so now an expert but not a total newbie either

any help greatly appreciated

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: October 12, 2008 at 7:39 AM / IP Logged

Is the second igntion powering up? Is the second starter powering up?

Mike M2

Tech Manager

CS Dealer Services

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 12, 2008 at 6:41 PM / IP Logged

I'm with Mike on this, my first thought on reading the post was ignition followed by transponder by pass. Even if the tach was "unlearned" there I've invented another new word, the dash lights would come on and the vehicle would start but only run for 15 secs.

Back to Top

cerivera

Member - Posts: 15

Joined: January 09, 2004

Location: United States

Posted: October 15, 2008 at 10:20 PM / IP Logged

well I switched the two ignition wires on the t-harness, now the vehicle starts but the ABS and Brake light stay on and the odometer is off till I put the key in. Ive tested all the wires involved, they all have contiunity from the end of the t harness to where they meet by the alarm module....could the alarm be defective?

any help greatly appreciated

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: October 16, 2008 at 12:18 AM / IP Logged

ABS and Brake lights on?

Does the climate control system come on during remote start?

I'll guess that Ignition 2 isn't being powered up during remote start.

Back to Top

cerivera

Member - Posts: 15

Joined: January 09, 2004

Location: United States

Posted: October 16, 2008 at 7:46 AM / IP Logged

thanks Chris, the climate control (blower) does not turn on in remote start mode. I will double check the 2nd ign wire

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 toyota highlander and autopage rs900

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.