bypass trouble, 2008 4runner

Home / the12volt's Install Bay / Car Security and Convenience / bypass trouble, 2008 4runner (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

schmoo

Copper - Posts: 62

Joined: April 21, 2005

Location: Canada

Posted: November 23, 2008 at 10:59 PM / IP Logged

I need some great minds to help me out. 2008 4runner, installed a autostart two-way and all works great with the key in the ignition (testing). Problem lies in the Fortin bypass(key-override-all). It will go into programming mode but will not learn the car. I have tried everything and have gotten nowhere. Anything you guys can point me towards. I am on the right wires according to instructions.

a true canadian eh!

Back to Top

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 04, 2008 at 3:03 PM / IP Logged

I was having the same problem with mine. Stupid error on me, I didn't have a good power connection. I would double check everything. Then you just have to push the button, insert the power connecter, then the other connector.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypass trouble, 2008 4runner

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.