problems with 2004 neon, ultra starter

Home / the12volt's Install Bay / Car Security and Convenience / problems with 2004 neon, ultra starter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mlathrop

Member - Posts: 7

Joined: January 04, 2009

Location: Connecticut, United States

Posted: January 04, 2009 at 1:34 PM / IP Logged

"Heres the problem....I have a manual car , i have the ebrake , door and brake pedal wired in ..all work as it triggers the "SET" pull ebrake, pump brake twice ...then turn key off car remains running exit car an close door and it shuts off. ... press the start button right away or with in 30 seconds it starts and runs the whole 15 mins no prob...can keep shutting off and restarting 90 percent of the time...but if i let it sit for a few min's it will..kick on the fan , radio , u can here the fuel pump kick on and then it will just wine away on the starter but nothing will start... put the key in clutch it and it will start right up ... any ideas?"

2004 Dodge Neon SXT 5speed

AST Ultra Starter 1270 M

Power Red and Pink/black

Ing 1 Blue wire..

ass 1 BLACK/ white

ass 2 black / orange

starter...Im running out to the starter direct to bypass clutch

Im using an Omega pass 4 bypass with ring ....but tryed a newer loop that use's wire wrapped around cylinder..

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 04, 2009 at 1:40 PM / IP Logged

Observe the small red dot in the dashboard, which is the security light.

Wnen you get a failed remote start, does the light come on steady and go out like it should, or is it flashing?

Alternately, temporarily unplug the bypass module, and simply leave the key in the ignition. (Obviously you wouldn't do this every day, just for testing.)

If the remote starter works reliably with the key in the ignition, then you know you have to go back and work on your bypass some more.

On the other hand, if the key in the ignition doesn't fix it, the problem must be somewhere else.

Back to Top

mlathrop

Member - Posts: 7

Joined: January 04, 2009

Location: Connecticut, United States

Posted: January 04, 2009 at 1:46 PM / IP Logged

Do i just put the key in or do i have to turn it aswell? i had the light a few times ..but im not having it anymore after switching to the wire wrapped around the cylinder....so what other problems do u think i could have ? ....i see some charts say the black / orange wire as ing 2 and ass how is that ?

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 04, 2009 at 1:50 PM / IP Logged

just put the key in, and unplug ur bypass and the perform ur remote start,

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

mlathrop

Member - Posts: 7

Joined: January 04, 2009

Location: Connecticut, United States

Posted: January 04, 2009 at 2:35 PM / IP Logged

still having the issue with the key in no transponder bypass on

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problems with 2004 neon, ultra starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.