the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

clutch switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
namyenruoj 
Copper - Posts: 64
Copper spacespace
Joined: May 27, 2009
Location: British Columbia, Canada
Posted: June 04, 2009 at 10:03 AM / IP Logged  
I have a security alarm/remote start "viper 5901" and I own a 1998 Toyota Rav4. I hooked it up and everything works except when I do the remote start some how I have to be inside to depress the clutch switch before I can be able to do the remote start. Is there a way of by passing the clutch switch so I can perform the remote start from outside the car?
hurleyloser 
Copper - Posts: 157
Copper spacespace
Joined: February 05, 2005
Location: California, United States
Posted: June 05, 2009 at 2:11 AM / IP Logged  
you can use a relay along with the (-) start output from the ribbon harness to trigger a relay that will close the clutch switch during remote start only. Remember to only use manual transmission mode on this unit though. Be safe.
MECP Master Certified Technician
ASE A6 Certified Technician
namyenruoj 
Copper - Posts: 64
Copper spacespace
Joined: May 27, 2009
Location: British Columbia, Canada
Posted: June 05, 2009 at 6:55 PM / IP Logged  
remote start auxiliary output, 5-pin
1. pink/white = (-) 200mA flex relay control output
2. orange     = (-) 200mA accessory output
3. violet     = (-) 200mA starter output
4. pink       = (-) 200mA ignition 1 output
5. blue       = (-) 200mA status output
which one of these wire i need to hook it up for my relay. thanks in advance
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 05, 2009 at 7:58 PM / IP Logged  

On your clutch switch you will find a red wire. This needs a (POS)+  start input.

This is what you can do.... take the starter output from the main harness on the remote start, and connect it to this red wire at the clutch.

You will NOT need to energize the starter wire on the ign. harness.

lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: June 06, 2009 at 12:00 AM / IP Logged  
there is alot easier way but we cant talk about it on here. Do the relay way its safer and dont leave it in gear.... be safe.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 06, 2009 at 1:51 AM / IP Logged  

lucasoil4u wrote:
there is alot easier way but we cant talk about it on here. Do the relay way its safer and dont leave it in gear.... be safe.

There is NO easier way. The 5901 is manual safe....thats all you need to do.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer