the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper responder 350


Post ReplyPost New Topic
< Prev Topic Next Topic >
2silent2nv 
Member - Posts: 5
Member spacespace
Joined: August 08, 2009
Location: Washington, United States
Posted: August 12, 2009 at 10:44 PM / IP Logged  
Hey, everyone. New guy here. I've did a search and haven't found that much info on the Viper Responder 350. I'm getting rid of my oem alarm and plan on getting a Viper 350. I don't need remote start or 1 mile range. I'll be adding a motion sensor, mini piezo siren, and a back up battery. It'll be my first time installing an alarm but hopefully it shouldn't be that bad. The alarm will be installed in my 97 Honda Prelude. Would this be a good alarm to install? Also can anyone provide me with a installation guide for the Viper Responder 350. I can't find it on here. Thanks.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 13, 2009 at 3:04 AM / IP Logged  
It's an entry level reasonably good quality alarm, original called Clifford Matrix 1/then Viper 350H but now with with a later  remote. Very simple, very reliable.
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: August 13, 2009 at 7:40 PM / IP Logged  

As howard said simple and reliable, i would be glad to help you out with the wiring if you want! if you haven't located a wiring diagram post back and i'll type up the info you would need!

2silent2nv 
Member - Posts: 5
Member spacespace
Joined: August 08, 2009
Location: Washington, United States
Posted: August 15, 2009 at 2:26 PM / IP Logged  
Nice, that's what I wanted to hear simple and reliable. My car already has a stock immobilizer so I figured I won't need the higher end dei alarms. Just something that makes noise and notifies me when someone is messing with it. I already downloaded the installation and owner's guide. Found it through googleviper responder 350 -- posted image.. I'll be installing it in two weeks when I'm not busy. I'll post again when the time comes. Thanks guys.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer