2004 ram remote start problems

Home / the12volt's Install Bay / Car Security and Convenience / 2004 ram remote start problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jdawg454

Member - Posts: 9

Joined: November 23, 2008

Location: Minnesota, United States

Posted: October 17, 2009 at 5:39 PM / IP Logged

2004 Dodge Ram truck, 1500 Hemi, doing remote start only. Viper 160xv.

Got everything wired in as instructed, when I hit the remote start button I can hear the relays click (also checked all wires for voltage at that time), I can feel the blower motor kick out air for a split second and the shift indicator lights up, but no start. Doesn't even crank. Can't hear the fuel pump start or anything like that. What is going on here? Am I missing something or do I have a bad part? It is the black key so there should be no need for the bypass unit. There must be something stupid I am overlooking.

Wired as follows:

Acc 1: Blue

Acc 2: Pink / YELLOW. (tried all 3 of those wires that are pink / YELLOW and no change)

Ign 1: pink/white

Ign 2:Pink/light green

Is there something I'm missing here? Thanks for any help, the quicker the better haha.

Thanks,

Jeremy

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 17, 2009 at 6:21 PM / IP Logged

ya the starter wire its yellow lol

jdawg454

Member - Posts: 9

Joined: November 23, 2008

Location: Minnesota, United States

Posted: October 17, 2009 at 6:35 PM / IP Logged

ha. yeah that's it!

Sorry, just forgot to put that... But I do have that wired up

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 17, 2009 at 6:39 PM / IP Logged

did you add a relay for the 2 ignition or 2 acc?

is it hooked up right?

second acc is the smallest pink / YELLOW but all that does is keep the abs and brake light from comming on....

you try starting it with the key and trying a take over with remote start?

did it stay running?

got solid ignition connections?

jdawg454

Member - Posts: 9

Joined: November 23, 2008

Location: Minnesota, United States

Posted: October 17, 2009 at 8:22 PM / IP Logged

I'm an idiot... For some reason I didn't hook up the 3rd 12v input to the satellite relay box. Don't know why I thought I didn't need it. But that was the problem. Guess thats what happens when you go a year between putting these in huh? I feel so dumb.

Thanks for the replys though!

chrisplm

Member - Posts: 4

Joined: November 01, 2007

Location: New York, United States

Posted: November 01, 2009 at 3:24 PM / IP Logged

Ok, so i just hooked up a remote start in an 05 Ram, everything is ok except the abs and brake lights stay on until i insert the key.

I found something about multiplexed 2nd start. so i added relays according to Audiovox's instructions and Cut into the PURPLE / Brown wire at the ign harness, but no difference???

Is there a better way to keep the lights off?

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: November 01, 2009 at 3:40 PM / IP Logged

chrisplm,

Anything involving relays and cutting a PURPLE / brown wire is only for the newest-style Chryslers with small ignition wires.

So whatever you did there, you probably will want to undo it.

If you look up there in metz35's post, you'll see the smaller pink / YELLOW accessory wire. It's neither really thick nor really thin........smaller than those other heavy ignition wires, but larger than the smallest ones in the harness.

Anyway, you just need to power that up as an accessory and you should be all set.

Since there are several pink / YELLOWs in there that all test as accessory, I would advise making a temporary connection at first (you don't even have to tape it up) and try the remote starter to make sure the lights go out, before making your connection permanent.

chrisplm

Member - Posts: 4

Joined: November 01, 2007

Location: New York, United States

Posted: November 01, 2009 at 7:30 PM / IP Logged

got it,

luckily it seems like i found the right pink yellow wire on the first try!

works like a charm now, thanks for your help.

(I just wish i realized it before i spent all that time wiring up the other relays that i thougt i needed)

2004 ram remote start problems -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 ram remote start problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.