the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

acura 3.2l


Post ReplyPost New Topic
< Prev Topic Next Topic >
maxcat 
Copper - Posts: 211
Copper spacespace
Joined: June 26, 2005
Location: Canada
Posted: November 12, 2009 at 11:25 AM / IP Logged  

Hey all ,  about to start a r/s install on a 2003 Acura TL 3.2L and all the info I have points toward getting the lock/unlock, arm/disarm wires in the drivers door. Does anyone know if that is the only location for these wires.Just did not really want to remove the door skin if I didn't have to. Any tips or advice would be greatly appreciated.

Thanks in advance

skee-weezy 
Copper - Posts: 177
Copper spacespace
Joined: March 08, 2008
Location: Michigan, United States
Posted: November 12, 2009 at 12:25 PM / IP Logged  
Only known location listed on just about every tech site i checked. I believe it could also be done via data with some of the newer interface modules. May wanna check into those... cost a little more but will save you time from having to go into that door!!!
there can be only one.......
maxcat 
Copper - Posts: 211
Copper spacespace
Joined: June 26, 2005
Location: Canada
Posted: November 12, 2009 at 1:05 PM / IP Logged  

thanks skee-weezy for the reply, yea I have checked a whole bunch of interface modules out there only to find they only do the transponder bypass, but I will keep looking.

Again thank you for the reply


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer