viper 350hv

Home / the12volt's Install Bay / Car Security and Convenience / viper 350hv (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gmotorhead

Member - Posts: 1

Joined: August 26, 2009

Location: Indiana, United States

Posted: November 13, 2009 at 4:14 AM / IP Logged

im installing a viper 350 hv alarm in a car trailor, i want to wire it so that if the alarm goes off it will energize the electric brakes also.is it possible to do this with a relay? the only out put i see is the siren, could i use that wire to a relay or is there another way?

Back to Top

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: November 13, 2009 at 10:07 AM / IP Logged

using a relay activated by the siren output will work fine.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 350hv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.