2007 ford sport trac canmax400dei

So I'm looking at installing something from the Python Responder LE line with the CANAMX400DEI...I haven't done an install in 4 or 5 years and having trouble wrapping my head around this. The only connections required are 2 wires (RX/TX) on the 20 pin CANAMX400DEI http://www.xpresskit.com/DocumentDownload.aspx?documentid=5588&productid=82&firmwareid=-1 And then the 12+ constant, siren +, ground, parking light (all on H1 connector). And the H3 connector (all the ING/starter) connections applicable. It just seems too easy.

you'll still need to hook up the plug with tach, hood pin, NSS, etc..... but yah, that's about it...Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

I hope you are getting the canmax dirt cheap....that would be the only way I could justify using that module on that vehicle. Basically, by using the canmax in D2D it will only save you from making 4 more connections compared to the module I would use.....idatalink ads-tb. 12,ign,ground,and gwr....3 of the connections, you will already be making for the remote start. I'm not saying the canmax won't work....but you might be able to save a little money by using something else.